• ํ†ตํ•ฉ๊ฒ€์ƒ‰
  • ๋Œ€ํ•™๋ ˆํฌํŠธ
  • ๋…ผ๋ฌธ
  • ๊ธฐ์—…์‹ ์šฉ๋ณด๊ณ ์„œ
  • ์ทจ์—…์ž๋ฃŒ
  • ํŒŒ์›Œํฌ์ธํŠธ๋ฐฐ๊ฒฝ
  • ์„œ์‹

๋…ผ๋ฌธ 634๊ฑด

The friction-welding SM25C is a substitute for the spring steel that is utilized in the machinery, airplane, and automobile, etc. This substitution would provide reduction of material and weight of welding parts. From the result we found that the strength of the friction welded joint was 529โˆผ617ใŽซ a
  • ํŽ˜์ด์ง€ 7ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 4,000์›
  • ๋ฐœํ–‰์ผ 2007.05.03
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ํ•œ๊ตญ์•ˆ์ „ํ•™ํšŒ(๊ตฌ ํ•œ๊ตญ์‚ฐ์—…์•ˆ์ „ํ•™ํšŒ)
  • ์ €์ž ์ •์„์ฃผ(Suk Choo Chung),์ด๊ธฐ์ค‘(Ki Jung Lee)
  • ํŽ˜์ด์ง€ 1ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 1,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž Jun-Won Kwon, Myoung-Soo Kang, Sung-Ook Yoon, Yong-Jai Kwon, Sung-Tae Hong, Dong-Hwan Park, Kwang-Ha
friction welded joint part was joined by inertia friction welder, MTI model 400. Mechanical and metallurgical properties of welded joints were evaluated by using microstructure, tensile, hardness and fatigue tests.Abstract INTRODUCTION FRICTION WELDING PROCESS ANALYSIS AND EXPERIMENT RESULT CONCLUSI
  • ํŽ˜์ด์ง€ 7ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ํ•œ๊ตญ์†Œ์„ฑ๊ฐ€๊ณตํ•™ํšŒ
  • ์ €์ž H.S Jeong, J.R Cho, S.K Choi, J.S Oh, E.N Kim
The use of titanium and its alloys is increasing day by day, especially in aerospace, automobile, and defense fields. Friction stir welding is a prominent solid-state joining process, which produces non-melting low heat input welds with less residual stresses compared to the conventional welding pro
  • ํŽ˜์ด์ง€ 10ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž Jae-Deuk Kim, Eun-Geun Jin, Siva Prasad Murugan, Yeong-Do Park
Three-dimensional finite element analysis is performed to study the temperature distribution phenomenon of TIG assisted friction stir welding (TAFSW) between dissimilar plates (Al 6061-T6 and stainless steel 304). TAFSW is a solid-state welding process that integrates TIG (Tungsten Inert Gas) into a
  • ํŽ˜์ด์ง€ 9ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž ๋ฐฉํฌ์„ , ์—  ์—์Šค ์— ์กฐ์ด
Friction stir welding has the advantage that many of the welding parameters, eg. tool design, rotation speed and travelling speed, can be contralled in a precise manner, thus controlling the energy input into the system. Therefore, the micro-structure of the welding aluminium were tested, the residu
  • ํŽ˜์ด์ง€ 4ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ํ•œ๊ตญํ•ด์–‘ํ™˜๊ฒฝยท์—๋„ˆ์ง€ํ•™ํšŒ
  • ์ €์ž Kelimu Tulugan, WonJun Lee, HanKi Yoon, SunChul Huh, WonJo Park
Friction Stir Welding (FSW) is a complex process with several mutually interdependent parameters. A slight difference from known settings may lead to imperfections in the stirred zone. These inhomogeneities affect on the mechanical properties of the FSWed joints. In order to prevent the failure of t
  • ํŽ˜์ด์ง€ 8ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž Igor Kryukov, Michael Hartmann, Stefan Bรถhm, Malte Mund, Klaus Dilger, Fabian Fischer
Friction stir spot welding (FSSW), developed based on principle of friction stir welding, has been paid attention as a new solid-state spot welding process. Since FSSW can produce high-quality weld in Al alloys more easily than resistance spot welding, this process has been already used for construc
  • ํŽ˜์ด์ง€ 4ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž Yutaka S. Sato, Mitsuo Fujimoto, Natsumi Abe, Hiroyuki Kokawa
In the present study, AA 5083-O plates are joined by friction stir welding technique. A universal milling machine was used to perform the welding process of the work-pieces which were fixed on the proper position by a vice. The joints were friction stir welded by two tools with different pin profile
  • ํŽ˜์ด์ง€ 8ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž M. M. El-Sayed, A. Y. Shash, M. Abd Rabou
Most publications on friction stir welding describe phenomena or results with given process parameters like feed rate, rotation speed, angle and depth of penetration. But without a complete documentation of tool design, the results under the same process parameters are completely different. For th
  • ํŽ˜์ด์ง€ 7ํŽ˜์ด์ง€
  • ๊ฐ€๊ฒฉ 6,000์›
  • ๋ฐœํ–‰์ผ 2019.03.01
  • ํŒŒ์ผ์ข…๋ฅ˜ ์•„ํฌ๋กœ๋ฒณ(pdf)
  • ๋ฐœํ–‰๊ธฐ๊ด€ ๋Œ€ํ•œ์šฉ์ ‘ยท์ ‘ํ•ฉํ•™ํšŒ
  • ์ €์ž Michael Hartmann, Stefan Bรถhm, Sven Schรผddekopf
top