• 통합검색
  • 대학레포트
  • 논문
  • 기업신용보고서
  • 취업자료
  • 파워포인트배경
  • 서식

논문 661건

Through this research study it is thought that the following is the result of the anchor length and anchor tension of the ship in the anchorage in Yeosu. 1. The average anchor tensions for each axle were 3908kgf at 3 shackles, 2,791kgf at 4 shakles, 4,866kgf at 5 shakles, 4,050kgf at 6 shakles, 1,56
  • 페이지 9페이지
  • 가격 6,000원
  • 발행일 2020.05.25
  • 파일종류 아크로벳(pdf)
  • 발행기관 전남대학교 어업기술연구소
  • 저자 송호진, 한왕탄, 김대진, 신형호
The anchor is laid on the seabed, and the main engine is working against incident environmental loads in a typhoon. As the main engine is broken down in the strom, the anchor chain is cut and the vessel drifts. Although a ship is moored by two-point mooring lines to maintain her position, it has cra
  • 페이지 5페이지
  • 가격 6,000원
  • 발행일 2020.03.01
  • 파일종류 아크로벳(pdf)
  • 발행기관 한국해양공학회
  • 저자 이호영, 임춘규
exclusive volume effect. In our study, improved thermal stability can be obtained by using more hydrophobic long-chained polyols, which is understood to be attributed to the effective formation of a hydrophobic polyol layer between the papain and the polymer wall by means of conformational anchoring
  • 페이지 5페이지
  • 가격 4,000원
  • 발행일 2019.05.25
  • 파일종류 아크로벳(pdf)
  • 발행기관 대한화장품학회
  • 저자 김용진 ( Yong Jin Kim ) , 김진웅 ( Jin Woong Kim ) , 김준오 ( Jun Oh Kim ) , 김진우 ( Jin Woo Kim ) , 장이섭 ( In S
load control scheme using the Markov chain model m terms of the new MN and the ongoing MN blocking probabilities Numerical results indicate that the above probabilities are lowered significantly compared to the threshold-based admission control alone요약 ABSTRACT Ⅰ.서론 Ⅱ.적응형 부하 제어 기법 Ⅲ
  • 페이지 8페이지
  • 가격 6,000원
  • 발행일 2020.03.01
  • 파일종류 아크로벳(pdf)
  • 발행기관 한국통신학회
  • 저자 백상헌, 권태경, 최양희
chain rule on horizontal tension were drawn from those and finally the estimation methods of the sag / tension sensitivity were proposed from both those. The nonlinear numerical analysis flow charts of sag sensitivity based on the catenary equations were proposed and the sag sensitivities grounded o
  • 페이지 12페이지
  • 가격 6,000원
  • 발행일 2020.03.01
  • 파일종류 아크로벳(pdf)
  • 발행기관 대한토목학회
  • 저자 정운, 서주원, 이원표
chain processes of the ICGCPS in order to improve performance measurements such as the total lead-time, the inventory quantity at the depot and the average rate of loading. A numerical example is presented to clarify the procedure proposed in this paper.Abstract 1. INTRODUCTION 2. CAR INDUSTRIES IN
  • 페이지 8페이지
  • 가격 6,000원
  • 발행일 2020.03.01
  • 파일종류 아크로벳(pdf)
  • 발행기관 대한산업공학회
  • 저자 Shusaku Hiraki, Takaya Ichimura, Kazuyoshi Ishii
anchorage, for which we have to consider of the external force and counter force for keeping the safety of anchoring. Where, external force is induced by wind, tidal currents and wave while counter force is induced by holding power of anchor/chain. In this study, author evaluated a method to analyze
  • 페이지 15페이지
  • 가격 6,000원
  • 발행일 2020.04.30
  • 파일종류 아크로벳(pdf)
  • 발행기관 한국수산해양교육학회
  • 저자 김세원
ACI 318-14 and 423.7-14 require the use of encapsulation system for an unbonded single-strand tendon for the purpose of corrosion protection and enhanced durability. In this study, load-carrying performance and hydrostatic tests were conducted for a newly developed, unbonded post-tensioning (PT) anc
  • 페이지 10페이지
  • 가격 6,000원
  • 발행일 2020.01.08
  • 파일종류 아크로벳(pdf)
  • 발행기관 한국콘크리트학회
  • 저자 Ah Sir Cho, Thomas H.-K. Kang
A study was conducted to investigate the load transfer mechanism of ground anchors through a series of field experiments and numerical modeling. Optical FBG sensors, embedded into the center king cable of a 7-wire strand, were applied to the different ground conditions to monitor the distribution of
  • 페이지 4페이지
  • 가격 6,000원
  • 발행일 2020.03.01
  • 파일종류 아크로벳(pdf)
  • 발행기관 대한토목학회
  • 저자 Kim,Youngsang, Do, Tanmanh, Jung, Shinhyun
analysis of the heavy load roller chain was conducted with a multibody dynamic analysis program. The results obtained in this study can be utilized for dynamic analysis of roller chain systems in all industries.1. 서론 2. 고하중용 롤러체인 시스템 동역학 해석 3. 내구성 연구 4. 결론 REFERENCES
  • 페이지 7페이지
  • 가격 6,000원
  • 발행일 2020.05.11
  • 파일종류 아크로벳(pdf)
  • 발행기관 Korean Society for Precision Engineering
  • 저자 Chang Uk Kim, Jin Chul Park, Dong Woo Lee, Jung Il Song
top