목차
1. Objective
2. Introduction & Background
3. Experimental Apparatus
4. Procedures
5. Results
2. Introduction & Background
3. Experimental Apparatus
4. Procedures
5. Results
본문내용
ition should be achieved in which the filament of dye passes down the complete length of the tube without disturbance. During this experiment, record the temperature of the water using the thermometer, and then measure the flow rate by timing the collection of a known quantity of water from the discharge pipe. Slowly increase the flow rate by opening the discharge valve until disturbances of the dye filament are noted. This can be regarded as the starting point of transition to turbulent flow. Measure and record the flow rate.
Further increase the flow rate and adjusting the supply as necessary to maintain the constant head, until the disturbances increase. Then measure and record the flow rate. Repeat the above steps again for second set of reading for all 3 flow conditions.
5. Results
Further increase the flow rate and adjusting the supply as necessary to maintain the constant head, until the disturbances increase. Then measure and record the flow rate. Repeat the above steps again for second set of reading for all 3 flow conditions.
5. Results
키워드
추천자료
- [화공기초실험] 비중 및 밀도 측정(예비레포트)
- [화공기초실험] 어는점 내림법에 의한 분자량 측정(예비레포트)
- [화공기초실험] 어는점 내림법에 의한 분자량 측정(결과레포트)
- [화공기초실험] 산화 환원 적정(예비레포트)
- [화공기초실험] 산화 환원 적정(결과레포트)
- [화공기초실험] 재결정(예비레포트)
- [화공기초실험] 재결정(결과레포트)
- [화공기초실험] pH 측정(결과레포트)
- 화공실험 건조
- [화공실험] 이중관 열교환기 : 이중관의 열교환장를 사용하여 난류상태에서 열전달 특성 이해...
- [화공실험] 하이시스(HYSYS) 이용한 공정 시뮬레이션 SIMULATION 결과 : n-Heptane 추출하고 ...
- [화공실험] 유체마찰 손실 및 유량측정 결과 : 교축유량계의 작동 및 측정원리, 유량 측정 숙...
- [화공실험] 오렌지Ⅱ의 합성 (디아조화 반응과 커플링 반응) 결과 : 술파닐산을 디아조화하고,...
- [화공실험] CO2 흡수 : 물에 의한 CO2의 흡수실험을 통하여 물질전달 이론을 이해하고 액체를...
소개글