목차
2-1]
2-3]
2-4]
2-5]
2-7]
2-12]
2-17]
2-44]
2-45]
2-3]
2-4]
2-5]
2-7]
2-12]
2-17]
2-44]
2-45]
본문내용
with an inner diameter of 4 cm and an outer diameter of 8 cm. The inside temperature is 100 and the outer temperature is 50. Calculate the heat transfer.
해석) 가운데가 빈 알루미늄 구는 4cm의 내부 직경과 8cm의 외부 직경을 가졌다. 안쪽 온도는 100이며 외부 온도는 50이다. 열전달을 계산하라.
2-38] Heat is generated in a 2.5-cm-square copper rod at the rate of . The rod is exposed to a convection environment at 20, and the heat-transfer coefficient is . Calculate the surface temperature of the rod.
해석) 한 변의 길이가 2.5-cm 인 정사각형 단면의 구리막대 내에서 의 열이 발생되고 있다. 주변 유체 온도가 20로 노출되어 있고, 열전달계수는 이다. 막대의 표면온도를 계산하라.
2-44] A 3.0-cm-thick plate has heat generated uniformly at the rate of . One side of the plate is maintained at 200 and the other side at 45. Calculate the temperature at the center of the plate for .
해석) 두께가 3cm이고 인 평판 안에 의 균일한 열원이 있다. 평판의 한 면은 200 그리고 다른 면은 45로 유지된다. 평판의 중심면에서 온도를 계산하라.
2-45] Heat is generated uniformly in a stainless steel plate having . The thickness of the plate is 1.0 cm and the heat-generation rate is . If the two sides of the plate are maintained at 100 and 200, respectively, calculate the temperature at the center of the plate.
해석) 두께가 1cm이고 인 평판 안에 의 균일한 열원이 있다. 만약 두 평판이 100 그리고 200로 유지된다면, 평판의 중심면에서 온도를 계산하라.
해석) 가운데가 빈 알루미늄 구는 4cm의 내부 직경과 8cm의 외부 직경을 가졌다. 안쪽 온도는 100이며 외부 온도는 50이다. 열전달을 계산하라.
2-38] Heat is generated in a 2.5-cm-square copper rod at the rate of . The rod is exposed to a convection environment at 20, and the heat-transfer coefficient is . Calculate the surface temperature of the rod.
해석) 한 변의 길이가 2.5-cm 인 정사각형 단면의 구리막대 내에서 의 열이 발생되고 있다. 주변 유체 온도가 20로 노출되어 있고, 열전달계수는 이다. 막대의 표면온도를 계산하라.
2-44] A 3.0-cm-thick plate has heat generated uniformly at the rate of . One side of the plate is maintained at 200 and the other side at 45. Calculate the temperature at the center of the plate for .
해석) 두께가 3cm이고 인 평판 안에 의 균일한 열원이 있다. 평판의 한 면은 200 그리고 다른 면은 45로 유지된다. 평판의 중심면에서 온도를 계산하라.
2-45] Heat is generated uniformly in a stainless steel plate having . The thickness of the plate is 1.0 cm and the heat-generation rate is . If the two sides of the plate are maintained at 100 and 200, respectively, calculate the temperature at the center of the plate.
해석) 두께가 1cm이고 인 평판 안에 의 균일한 열원이 있다. 만약 두 평판이 100 그리고 200로 유지된다면, 평판의 중심면에서 온도를 계산하라.
키워드
추천자료
열역학 개념과 정의 - 열역학 2장 교재 정리
[건축환경공학] 자연형 태양열 조절시스템(PassiveSystem)과 설비형 태양열 조절시스템(Activ...
[열유체실험] 증기 압축식 열펌프 성능실험
열전도(1차원 정상상태 열전도 실험)
폐기물의 열분해 공정(열분해장치, 가열방식, 기본공정, 장치종류)
열역학 제1법칙, 열역학 제2법칙, 열용량, 단열, 방열, 열전도 법칙 및 상변화(열역학1)
[올해최신자료]동아시아를 만든 열가지 사건[동아시아를만든열가지사건서평][동아시아를만든...
[공식][수학][물리학][공학][열역학][블랙숄즈]고등수학의 공식, 물리학의 공식과 단위, 열역...
[열역학] 열역학 역사, 열역학 법칙, 열역학과 실생활
(결과) 실험 12 열역학 제1법칙, 열역학 제2법칙, 열용량, 단열, 방열, 열전도 법칙 및 상변...
사회복지서비스에서 전달체계가 중한 영역을 차지하고 있으므로 주요원칙에 대해 논의
[고체][열팽창계수][탄성파][고체배양기][고체이미지센서][고체전자][탄력파동][STS프로그램]...
[인체반응(신체반응), 열, 독소(독성, 독극물), 병원체]열에 대한 인체반응(신체반응), 독소(...
열계량 실험(결과 레포트)열의 흡수 또는 방출되는 양을 측정
소개글